B2B · Automotive trade

Domed badges and stickers for the automotive trade

Garages, dealerships, detailers and fleet operators

Your workshop name, your fleet identity, your customer gift - printed, contour cut and covered with a resin dome in Prizren. Trade runs are produced from artwork you own or hold the rights to use: no manufacturer emblem is produced for resale.

Resin dome resists water, UV, fuel splashes and car-wash brushes
Sized for key fobs, steering wheel centres, dashboards and panels
Your own artwork only - no manufacturer emblem produced for resale
From 50 pieces per design, produced in 4-6 working days

Request a trade quote Price your badges

from €2.28 per piece · From 50 pieces · Production 4-6 working days

Three products for the trade

Badges, fleet stickers and keychains

Each of the three is produced from the artwork you own. Quantities start at 50 pieces per design and can be mixed in a single quote.

Round domed badges
Ø 14 to 25 mm
For key fobs, steering wheel centres and dashboard trims. Printed, contour cut, domed in resin, with a permanent adhesive that survives cleaning.
See round domed badges
Fleet stickers
Vans, service cars, trailers
Contour-cut vinyl door sets or domed badges for a whole fleet: same file, same colours, batch after batch, so a replacement vehicle matches the rest.
See vinyl stickers
Domed keychains
Handover, courtesy cars, showroom gifts
Your logo domed in resin on a keychain, for vehicle handover, courtesy cars and workshop gifts. Priced on quote from 50 pieces.
Request a quote

Technical sheet

The same build as our resin domed stickers, in the formats the trade asks for most.

Typical badge sizes: Ø 14, 20 and 25 mm — any size from 10 to 120 mm
Build: Printed vinyl, contour cut, polyurethane resin dome
Adhesive: Permanent acrylic, on a clean and degreased surface
Resistance: Water, UV, fuel splashes, automatic car wash
Minimum order: 50 pieces per design
Lead time: 4-6 working days production, plus shipping

We print your artwork, not someone else's

Car manufacturer logos are registered trademarks. For trade orders - workshop signage, fleet branding, resale - we produce your own identity: your garage name, your dealership brand, your club emblem. A manufacturer logo is only reproduced when the customer holds the rights (dealer, licensed reseller) or for the personal use of the vehicle owner. Photographs in our gallery show work carried out for the owners of those logos, which remain their property.

Read the round badges page

How a trade order runs

Four steps, one contact person

1
Send your logo
Vector file if possible, with the diameter or size you need and the surface it goes on.
2
Quote within 24 working hours
Price per piece and per batch, with a visual of the badge at real size.
3
Print, cut and dome
Printing, contour cutting, resin dosing and curing in our Prizren workshop.
4
Delivery and reorders
Shipped with an invoice; the approved file stays on record for the next batch.

Badges and fleet work

Questions from garages and fleets

Can you produce badges with a car manufacturer's logo?

Car manufacturer logos are registered trademarks. For anything sold on or applied to a fleet, we produce your own identity - garage name, dealership brand, club emblem. We reproduce a manufacturer logo only when you hold the rights (dealer, licensed reseller) or for the personal use of the vehicle owner.

What size should a badge for a car key be?

Most key fobs take a round badge between 14 and 25 mm. Measure the recess or the flat area, or send us a photograph next to a ruler, and we will confirm the diameter before production.

Will a domed badge survive an automatic car wash?

Yes, on a correctly prepared surface. The resin dome is water, UV and fuel-splash resistant. Clean and degrease the surface before applying, then leave the adhesive to bond for 24 hours before the first wash.

Can we reorder the same badge later?

Yes. The print file and the cutting contour stay on record after the first approved batch, so a reorder is one message and keeps exactly the same colours and size.

Request your automotive trade quote

Badges, fleet stickers, keychains — tell us the quantity and we reply within 24 working hours.

You may also need

Round Car Badges — Domed Emblems for Key Fobs & Dashboards

Custom round domed badges 14-25 mm for car keys, steering wheels and dashboards. Glossy, chrome or brushed finish, 3M adhesive, from 50 pieces.

Custom Vinyl Stickers — Matte or Glossy, Kiss-Cut & Die-Cut

Custom vinyl stickers with automatic contour cutting. Matte or glossy, waterproof, 20-500 mm, from 50 pieces. Produced in 4-6 days, shipped across Europe.

Gallery — Real Domed Stickers, Badges & Vinyl Work

Photos of real orders: resin domed logos, round car badges and die-cut vinyl stickers produced in our Prizren workshop for customers across Europe.

Brand your workshop and your fleet

From 50 pieces, produced in Prizren in 4-6 working days

Request a B2B quote Design your sticker

Domed badges and stickers for the automotive trade

Three products for the trade

Round domed badges

Fleet stickers

Domed keychains

Technical sheet

We print your artwork, not someone else's

How a trade order runs

Send your logo

Quote within 24 working hours

Print, cut and dome

Delivery and reorders

Badges and fleet work

Questions from garages and fleets

Can you produce badges with a car manufacturer's logo?

What size should a badge for a car key be?

Will a domed badge survive an automatic car wash?

Can we reorder the same badge later?

Request your automotive trade quote

You may also need

Round Car Badges — Domed Emblems for Key Fobs & Dashboards

Custom Vinyl Stickers — Matte or Glossy, Kiss-Cut & Die-Cut

Gallery — Real Domed Stickers, Badges & Vinyl Work

Brand your workshop and your fleet

Domed badges and stickers for the automotive trade

Three products for the trade

Round domed badges

Fleet stickers

Domed keychains

Technical sheet

We print your artwork, not someone else's

How a trade order runs

Send your logo

Quote within 24 working hours

Print, cut and dome

Delivery and reorders

Badges and fleet work

Questions from garages and fleets

Can you produce badges with a car manufacturer's logo?

What size should a badge for a car key be?

Will a domed badge survive an automatic car wash?

Can we reorder the same badge later?

Request your automotive trade quote

You may also need

Round Car Badges — Domed Emblems for Key Fobs & Dashboards

Custom Vinyl Stickers — Matte or Glossy, Kiss-Cut & Die-Cut

Gallery — Real Domed Stickers, Badges & Vinyl Work

Brand your workshop and your fleet